UGV starts normally, but vehicle body unresponsive to the control of remote controller?
1. Release rear emergency stop switch.
2. Set SWA joystick to remote control mode, keep SWB gear out of parking position. Hold down VRB safety switch during operation.
3. Make sure that you are not charging via the charging port.
What should I do if the remote controller battery is low and the vehicle stops running?
Please replace the battery of the remote control immediately, after that, normal communication will recover soon.
The charging LED (Green) is off
Please firstly check whether the connection of the charger input interface is correct and firm; and then, check whether there is AC input.
The Charging LED (Red) is off
1. Verify charger input interface is connected correctly securely;
2. Check if the battery has been unused for a long time, over-discharged or damaged.
3. Reconnect the Input/Output plugs (≥10s interval) to check if the charger is in protection mode.
OMNI Series auto-switches to Parking Mode after a idle period with no remote control or command.
When remote control and command inputs function normally, the vehicle will activate low-power mode during extended periods of inactivity, auto-switch to parking mode, reducing motor current, preventing motor overload, and saving power.